Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Activity
    Johan Degraeve
    @JohanDegraeve
    ok, I will give the status update here
    Pete Schwamb
    @ps2
    If you turn the xdrip support into a framework, like I do with the RileyLinkBLEKit (https://github.com/ps2/rileylink_ios/tree/master/RileyLinkBLEKit), then that would provide a path to incorporating it in to Loop.
    Martin Haeberli
    @mhaeberli
    :+1:
    @JohanDegraeve :+1: to @ps2 suggestion re framework
    Roderic Campbell
    @rodericj
    Hi, everyone. Just joined the room. Let me know how I can help out on the iOS/watchOS side of things.
    Eric Mark Martin
    @ericmarkmartin
    Welcome
    Right now I'm busy with classes so I'm not really sure what's going on, but @someoneAnyone will be the best person to adk
    *ask
    Roderic Campbell
    @rodericj
    Thanks @ericmarkmartin. I'll reach out to him directly.
    Jeremy M Lucas (GetRileyLink.org)
    @jlucasvt
    RILEYLINKS IN STOCK AND READY TO SHIP
    https://getrileylink.azurewebsites.net
    Ghost
    @ghost~581de719d73408ce4f33d2ff
    So I can't quite get everything totally figured out yet. I pre-ordered an explorer board, a 2000mah LiPo, and purchased an edison with the breakout board to flash the edison and get some things figured out before the explorer board comes into the picture. I have a deacon G4 platinum and an iPhone 6s. Will I still need to use the dexcom receiver or can xdrip substitute for this? Is xdrip support integrated into the explorer board? Is there a module I can purchase to integrate xdrip into the explorer board?
    Dana Lewis
    @danamlewis
    you might want to pop over to the intend-to-bolus channel - I’ll answer you there since it sounds openaps related.
    zadriel
    @zadriel
    .
    zadriel
    @zadriel
    Curious. Anyone done any work with the connect for IOS and 751 most recent firmware? Primarily I'm hoping for Watch application to view graphs ANd manual bolus from watch.
    chelle0207
    @chelle0207
    Is there a way to do a one-off run of autotune on iOS?
    Dana Lewis
    @danamlewis
    @chelle0207 hi - right now to do a one-off run of autotune you'll need to spin up a Linux VM (and you can do that regardless of what type of computer or phone you have). Documentation here. https://github.com/openaps/docs/blob/master/docs/docs/walkthrough/phase-4/autotune.md#phase-c-wip-running-autotune-more-easily-as-an-average-user
    chelle0207
    @chelle0207
    @danamlewis thanks!
    Kerub Querubin
    @asdfkerub
    Hello, what is the best way to save an image to mongoose db?
    Scott Leibrand
    @scottleibrand
    What is the mongoose db, and why would you want to save an image there?
    Kerub Querubin
    @asdfkerub
    Im using MEAN as a backend api
    Scott Leibrand
    @scottleibrand
    Sorry, I have no idea what you're talking about. Are you in the right room?
    Kerub Querubin
    @asdfkerub
    Oh sorry. Thanks for the reply!
    Martin Haeberli
    @mhaeberli
    I think @asdfkerub means “MongoDB"
    rsilvers129
    @rsilvers129
    I have some code which will take old data that you download from DexCom’s Clarity site, and then load it into NightScout. I think this is of general interest, so it should probably be parked somewhere on GitHub. Not sure where it should live though.
    Martin Haeberli
    @mhaeberli
    @rsilvers129 can your code for capturing clarity see calibrations, etc?
    rsilvers129
    @rsilvers129
    @mhaeberli No. I am not sure that Dexcom even has those as downloadable. But if they do, then it would be easy to have it not ignore those.
    Martin Haeberli
    @mhaeberli
    K thx
    Martin Haeberli
    @mhaeberli
    @rsilvers129 - as a suggestion, you could make a new github repository off of your github account, and make it publicly viewable… - then publish a note here and maybe on intend-to-bolus about where it is.
    andyrusch
    @andyrusch
    Just wondering if anyone knows why w
    The Android uploader for the 600 series is Android only.
    It seems like iOS allows app access to the port so USB could be used similar to Android. Was going to work on this but wondering if there's a known limitation?
    jath622
    @jath622
    Screen Shot 2017-09-29 at 3.52.10 PM.png
    jath622
    @jath622
    Getting stuck on this screen trying to update my NS. The Merge Pull Request button never appears. Where did I go wrong?
    Dana Lewis
    @danamlewis
    @jath622 swap so you merge into your branch from nightscout (see where it says you're doing the obvious)?
    click edit button (top right) and switch the branches
    Cathje
    @Cathje
    HI all, I'm trying to develop a react-native app that works on ios and reads blucon (freestyle libre) data and uploads it to the nightscout site. I'm already able to read previously inputted entries (with an android app) from the NS API. However, posting entries gives me a network failed due to 'unauthorized' and no 'Access-Control-Allow-Origin'-error. I created a device-upload role. I added the same permissions as the rig and used the generated accesstoken from the admin page in the network call (https://mysite.herokuapp.com/api/v1/entries.json?token=iosupload-123456789012. I also added cors to the enable config variable of heroku and cors_allow_origin to *. Am I still missing something ? Or does anyone has an example on how to do a fetch to an authorize-protected call?
    Miguel Kennedy
    @miguelkennedy
    @Cathje don't know if you're aware but there's already an app for iOS that reads blucon and uploads to nightscout https://github.com/JohanDegraeve/iosxdripreader
    Cathje
    @Cathje
    Thank you very much for the quick answer. I tried that one 2 days ago and although I have a developers account in ios and I could upload the ipa file to my phone, It gave a general error message that the app could not be installed. Since the error message is so general, I had no idea where to look. I tried a different developer account, different certificate, ... but no luck. So , since I'm a developer myself , I had hoped to write the app in a technology I know and add features along the way. If I could just get already the values in the nightscout site.. then I'm up and running for the first part of the loop.
    Miguel Kennedy
    @miguelkennedy
    @Cathje that's a problem with the signing of the ipa... you can join https://gitter.im/nightscout/iosxdripreader and I'm sure someone will help you out with the signing
    Cathje
    @Cathje
    @miguelkennedy : Thanks. I'll try that.
    Chris Walters
    @chwalters
    Hello, I'm new here. I've been working on the iOS app for Glucosio and learned from Ben Kerensa that perhaps this project could use some iOS help? Where can I ask questions about the iOS aspects of Nightscout?
    Scott Leibrand
    @scottleibrand
    Much of the more recent discussion is in https://gitter.im/OpenAPSApp/Lobby
    Andrew Ditmer is also one of the ones involved in the non-OpenAPS-specific Nightscout app efforts.
    Chris Walters
    @chwalters
    Thanks I will join that group
    Scott Leibrand
    @scottleibrand
    does anyone here know how hard it'd be to update ios-monitor to take advantage of the iPhone X screen height? nightscout/ios-monitor#19
    Pete
    @someoneAnyone
    @scottleibrand I don't think it would be too hard to recompile the app but I dont know if anyone is able to republish the app in the app store.
    the project has been stale for years.
    Scott Leibrand
    @scottleibrand
    Yeah, we’d have to see if anyone still has the App Store credentials. I’d be interested to see how many active users the app has...
    For now I’ve switched to a home screen app icon and manually disable my screen auto-lock before bed.
    John Costik
    @hackingtype1
    I can probably update it this week.