Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
    Benjamin Dupalut
    @binibitobi_gitlab

    Hello everyone,

    Does anyone have an idea please?

    Fdall
    @Fdall
    @binibitobi_gitlab The augeas method does not work that way. Augeas uses lenses to observe the target file, following some pre-defined path. Check the augeas documentation if you want to know more about it.
    In your case, the easiest way it most likely to use the file key value present, since your line seems to match the pattern <key><separator><value> with:
    • @ syslog.xxxxxx as key
    • : as separator
    • the port as value
    Benjamin Dupalut
    @binibitobi_gitlab
    Hi @Fdall. Thank you for your reply. I will try this.
    Benjamin Dupalut
    @binibitobi_gitlab

    Hi,

    I configured a technique with the file key-value present method but it still indicates non-compliant while the value and the key are present in the file:

    image.png
    Fdall
    @Fdall
    Erf, I am indeed able to reproduce, this is a bug. I believe it comes from an incorrect escaping somewhere in the method which uses regex. I will try to investigate it this week and let you now, no easy workaround atm
    Benjamin Dupalut
    @binibitobi_gitlab
    Thank you for your reply and your action.
    Rana Masud
    @mrana_dev_gitlab
    Is there any documentation to configure schedule in rudder?
    Elenui
    @Elenui
    hello you mean the agent run schedule ?
    14 replies
    lpwevers
    @lpwevers

    Hi Everyone,

    Just thought I let you know. If there are people who use CheckMK as their monitoring system, there's now a plugin available for monitoring the status of the Rudder agent. You can download it from the CheckMK Exchange:
    https://exchange.checkmk.com/p/rudder

    xlbt
    @xlbt
    Sorry if this question has already been asked, but is there a place to find a copy of a deleted file with the "File absent" method ?
    Thanks.
    Fdall
    @Fdall
    Hi @xlbt you can check on your agent under the folder /var/rudder/modified-files, but I am not sure that the agent keep a backup before removing file
    xlbt
    @xlbt
    This is the first place I looked, but unfortunately there is no backup of the deleted file.
    Elenui
    @Elenui
    Hello Team
    I'm having trouble with my jetty, i can't find the log. anyone have in thought where it's located ?
    get nothing inside : /var/rudder/jetty/lgos
    hum ok it's back after a reboot
    :(
    Tanguy PELADO
    @tpelado

    Good day everyone,

    I'm having some weird bahaviours on node upon upgrading them to our new rudder server.
    Some of them won't run the agent automatically, and as such they show up as not running on the server.

    rudder agent run is okay and reports not errors.
    rudder agent health also reports OK.

    This could be some weird cron related stuff, but I wanted to know if there's a known issue

    Nicolas Charles
    @ncharles
    they are in /var/log/rudder/webapp
    @tpelado you upgraded to which version ?
    if you run rudder agent history on the node, do you see that the agent is run every 5 minutes?
    Tanguy PELADO
    @tpelado
    Running "rudder agent history" shows that the agent doesn't run on its own after upgrading to 6.2 (we were on 4.X)
    Elenui
    @Elenui

    they are in /var/log/rudder/webapp

    indeed but it was empty when I check. I thought logs were somewhere else ^^"

    Tanguy PELADO
    @tpelado
    on a side note : it would be a nice feature to have criteria using logic between themselves. As an exemple, you could have a groupe that has ("Node OS = Debian" AND "node Location = DC1") AND NOT "Node property foobar is defined"
    a bit like the factorio train stop condition logic, if that talks to anyone (doubt it does :D )
    Nicolas Charles
    @ncharles

    Running "rudder agent history" shows that the agent doesn't run on its own after upgrading to 6.2 (we were on 4.X)

    i'm unsure the direct upgrade from 4.x to 6.2 is supported

    can you run rudder agent info
    it might be that the agent was either disabled, or its uuid modified
    Nicolas Charles
    @ncharles
    if it is disabled, you may run rudder agent enable
    Tanguy PELADO
    @tpelado
    I have removed the agent and factory reseted the node
    so that should not be an issue per se
    Nicolas Charles
    @ncharles
    when you factory reset it, you give it a new rudder id
    so it's not the same node
    Tanguy PELADO
    @tpelado
    yes, that is correct
    but I suspect there might be some old files still there
    the thing is : i've done this on multiple nodes, and only some of them are behaving like this
    image.png
    update was at 1700
    you can see it running twice and never running again
    Nicolas Charles
    @ncharles
    what does rudder agent info say ?
    Tanguy PELADO
    @tpelado
     root@NPERF:~# rudder agent info
Hostname: NPERF
UUID: 3
Key hash: MD5=2
Certificate creation: Dec  7 17:06:26 2021 GMT
Certificate expiration: Dec  5 17:06:26 2031 GMT
Certificate fingerprint: 54
Policy server: rudder-v2
Roles: rudder-agent
Report mode: full-compliance
Run interval: 5 min
Agent is enabled
Agent is not forced in audit mode
Configuration id: 20211207-170708-
Policy updated: 2021-12-07 18:07:33
Inventory sent: 2021-12-07 18:06:35
Version: Rudder agent 6.2.11-debian11
root@NPERF:~#
    i've removed some of the values, reckon they shouldn't be needed for troubleshooting
    Nicolas Charles
    @ncharles
    this is interesting - it ought to be running
    can you check if cf-execd is running ?
    Tanguy PELADO
    @tpelado
    root@NPERF:~# ps aux | grep cf-exec[d]
root@NPERF:~#
    there's no process running with that name
    Nicolas Charles
    @ncharles
    that's the cause of the issue
    Tanguy PELADO
    @tpelado
    I've tried the same on a "good" node and the process is running as expected.
    now, why isn't it running