Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
    srv_er
    @saurav955
    FAILED! => {"attempts": 3, "changed": false, "msg": "time=\"2019-12-24T16:04:39+05:30\" level=fatal msg=\"pinging docker registry returned: Get https://registry.redhat.io/v2/: proxyconnect tcp: EOF\" \n", "state": "unknown"}
    any suggestions!
    srv_er
    @saurav955
    Hi, It's resolved. The problem was with my proxy. Thanks!
    Michal Kelner Mishali
    @mkelnermishal
    Hey, I'm looking for some help with creating a Network Operator in Openshift 4.2 (and hoping I reached the right place).
    The purpose of it is to have a specific SDN and not the default Openshift-SDN. I'm using nsx-t (vmware) cni plugin.
    For the creation of the Operator, I've created some yamls containing the code for the pods that will serve the network. The yamls are being executed during the cluster creation from the manifests directory. the last bit is to update the config.openshit.io of the status of this network. done that.
    Only problem is, the pods for the cluster are stuck in "ContainerCreating" and network operator is stuck in "Progressing".
    Does anyone here have any experience with such thing and might shed some light ?
    Thanks in advance.
    atrujillo10
    @atrujillo10
    @RaffaStefanile_twitter did you solve the warning: Wait for control plane pods to appear ?
    Daniel
    @pancudaniel7
    Hi guys, can I ask something about a minishift problem here ?
    Tom
    @spirit986

    Hello everyone, I am receiving a strange error with the latest version 3.11 version of Openshift

    TASK [openshift_persistent_volumes : Create PersistentVolumes]
    fatal: [master01.okd.aws-ireland.pegb.tech]: FAILED! => {"changed": false, "cmd": ["oc", "create", "-f", "/tmp/openshift-ansible-L1lbxOR/persistent-volumes.yml", "--config=/tmp/openshift-ansible-L1lbxOR/admin.kubeconfig"], "delta": "0:00:00.211142", "end": "2020-01-07 13:04:03.256006", "failed_when_result": true, "msg": "non-zero return code", "rc": 1, "start": "2020-01-07 13:04:03.044864", "stderr": "The PersistentVolume \"registry-volume\" is invalid: spec: Required value: must specify a volume type", "stderr_lines": ["The PersistentVolume \"registry-volume\" is invalid: spec: Required value: must specify a volume type"], "stdout": "", "stdout_lines": []}

    The only similar issue with that one is openshift/openshift-ansible#11722 but there is no resolution so far and I am lost ...

    Arkadiusz Ryćkowski
    @ryckowski
    I've run quick installation 3.11 via oc cluster up --public-hostname on ubuntu 18.04. It's working but learnt oc get pods -n default that docker-registry-1-deploy and router have status Error. How to diagnose the reason ?
    Bill Liu
    @holyender
    hey i installed openshift 4.2 but im not able to access the logs and terminal on any pods
    the pods are up and ok
    anyone know what i could be missing
    titorec
    @titorec

    hello.. I'm trying install openshift 3.11 using ansible

    I'm trying install the master and node at the same machine

    I'm getting the follow error:
    ast_checked_var: openshift_master_identity_providers;openshift_master_identity_providers contains a provider of kind==HTPasswdPasswordIdentityProvider and filename is set. Please migrate your htpasswd files to /etc/origin/master/htpasswd and update your existing master configs, and remove the filename keybefore proceeding.

    somebody may to know what happend ?

    Vijesh KP
    @kpvi

    FAILED - RETRYING: Wait for all control plane pods to come up and become ready (1 retries left).
    [WARNING]: Module invocation had junk after the JSON data: Error in atexit._run_exitfuncs: Traceback (most recent call last): File "/usr/lib64/python2.7/atexit.py", line
    24, in _run_exitfuncs func(targs, **kargs) File "/tmp/ansible_oc_obj_payload_qUoHDe/ansible_oc_obj_payload.zip/ansible/modules/oc_obj.py", line 1260, in cleanup
    AttributeError: 'NoneType' object has no attribute 'path' Error in sys.exitfunc: Traceback (most recent call last): File "/usr/lib64/python2.7/atexit.py", line 24, in
    _run_exitfuncs func(
    targs, **kargs) File "/tmp/ansible_oc_obj_payload_qUoHDe/ansible_oc_obj_payload.zip/ansible/modules/oc_obj.py", line 1260, in cleanup
    AttributeError: 'NoneType' object has no attribute 'path'

    after 80 retry it failed.

    #

    # host group for masters

    [masters]
    ocpmaster1
    ocpmaster2
    ocpmaster3
    [etcd]
    ocpmaster1
    ocpmaster2
    ocpmaster3
    [nodes]
    ocpmaster1 openshift_node_group_name='node-config-master'
    ocpmaster2 openshift_node_group_name='node-config-master'
    ocpmaster3 openshift_node_group_name='node-config-master'
    ocpinfra openshift_node_group_name='node-config-infra'
    ocpnode1 openshift_node_group_name='node-config-compute'
    ocpnode2 openshift_node_group_name='node-config-compute'

    getting above error while configuring openSHIFT 3.11. Anyone faced this problem?

    prashant
    @prashant1987_gitlab
    i am getting same issue which was observed by vijesh. any solution
    Simon Wakenhut
    @simwak
    @kpvi @prashant1987_gitlab @RaffaStefanile_twitter @atrujillo10 I have the same Issue, did you solve this problem?
    Pawan Kumar
    @pawan.yoda_gitlab
    Hi Everyone.
    I have provision infra with the help of openshift-install. I have used openshift client to creating own environment. But it not suited for us.
    How can I connect the existing environment that running on AWS.
    right now i can't say pros and cons.
    If someone guide on that will appreciated.
    Vijesh KP
    @kpvi
    @simwak not yet. same issue
    Simon Wakenhut
    @simwak
    @kpvi do we have a Issue on github already?
    @kpvi Becouse the deployment worked back in 2019
    Simon Wakenhut
    @simwak
    Simon Wakenhut
    @simwak
    @kpvi @prashant1987_gitlab @RaffaStefanile_twitter @atrujillo10 See my comment openshift/openshift-ansible#12065
    JieJhih
    @JieJhih

    Hi everyone, I'm using openshift-ansible(release-3.11) to deploy a cluster
    I want to deploy a service using SCTP protocol, but I got below error:
    The Deployment "amf-deployment" is invalid: spec.template.spec.containers[0].ports[0].protocol: Unsupported value: "SCTP": supported values: "TCP", "UDP"

    Is there any way to set --feature-gates=SCTPSupport=True in OKD 3.11?

    mr31337
    @mr31337
    здарова бандиты
    Tim Bo
    @timbrd
    Hi all. I'm currently deploying a new okd 3.11 cluster. Unfortunately the cockpit/kubernetes image seems to be gone:
    OpenShift Health Checks Run health checks (install) - EL One or more checks failed check "docker_image_availability": One or more required container images are not available: docker.io/cockpit/kubernetes:latest Checked with: skopeo inspect [--tls-verify=false] [--creds=<user>:<pass>] docker://<registry>/<image>
          OpenShift Health Checks
         Run health checks (install) - EL
         One or more checks failed
         check "docker_image_availability":
                   One or more required container images are not available:
                       docker.io/cockpit/kubernetes:latest
                   Checked with: skopeo inspect [--tls-verify=false] [--creds=<user>:<pass>] docker://<registry>/<image>
    It's missing from the cockpit project on dockerhub: https://hub.docker.com/u/cockpit
    Tim Bo
    @timbrd
    Is it related to this commit maybe? cockpit-project/cockpit@37aa31e
    Tomas
    @maxysoft
    Hello all, I've deployed OKD 3.11 with openshift-ansible but the pod "registry-console" failed to start. When I was checking the logs I found this: "error: No such image: docker.io/cockpit/kubernetes:latest". I've removed and deployed the registry manually but now there isn't the registry-console. Is there a way to fix it? Sorry but I'm very new to this
    Simon Wakenhut
    @simwak
    See this issue openshift/openshift-ansible#12115 if you have problems with the cockpit/kubernetes image!
    Tomas
    @maxysoft
    Thanks, problem solved
    lakmal-ya
    @lakmal-ya
    hi
    selinux error.PNG
    selinux error2.PNG
    i got error "SELinux boolean container_manage_cgroup does not exist" and fail deployment
    lakmal-ya
    @lakmal-ya
    @zoobab fatal: [localhost]: FAILED! => {"changed": false, "msg": "SELinux boolean container_manage_cgroup does not exist."} did you slove this
    Daniel
    @pancudaniel7
    How tried Jenkins X with openshift ?
    aselvaveltcs
    @aselvaveltcs
    TASK [openshift_ca : Generate the loopback master client config] **
    Sunday 10 May 2020 08:50:17 +0300 (0:00:00.690) 0:10:20.330 **
    fatal: [mwdp3dev3aio.moh.gov.sa -> mwdp3dev3aio.moh.gov.sa]: FAILED! => {"changed": true, "cmd": ["oc", "adm", "create-api-client-config", "--certificate-authority=/etc/origin/master/ca.crt", "--certificate-authority", "/etc/origin/master/named_certificates/mwdp3dev3aio.crt", "--client-dir=/tmp/openshift-ansible-lXwSFN", "--groups=system:masters,system:openshift-master", "--master=https://mwdp3dev3aio.moh.gov.sa:8443", "--public-master=https://mwdp3dev3aio.moh.gov.sa:8443", "--signer-cert=/etc/origin/master/ca.crt", "--signer-key=/etc/origin/master/ca.key", "--signer-serial=/etc/origin/master/ca.serial.txt", "--user=system:openshift-master", "--basename=openshift-master", "--expire-days=1825"], "delta": "0:00:00.219427", "end": "2020-05-10 08:50:18.846567", "msg": "non-zero return code", "rc": 1, "start": "2020-05-10 08:50:18.627140", "stderr": "error: certificate-authority must be a valid certificate file: error reading /etc/origin/master/named_certificates/mwdp3dev3aio.crt: data does not contain any valid RSA or ECDSA certificates", "stderr_lines": ["error: certificate-authority must be a valid certificate file: error reading /etc/origin/master/named_certificates/mwdp3dev3aio.crt: data does not contain any valid RSA or ECDSA certificates"], "stdout": "", "stdout_lines": []}
    I have kept all ca,crt and key files in on filename...tried to install certificate in openshift 3.11. the above error occures.
    Please let me know any thoughts ?
    omiozil
    @omiozil
    can we install OCP 3.11 in centos
    matedemorphy
    @matedemorphy
    Hi
    Probably this is a dump question but i need to know...OKD Minishift can be used like a Vagrant box?
    Can i create a Ruby on Rails project in Minishift in development mode?
    venesh0709
    @venesh0709
    How to configure Ansible Tower/AWX for OpenShift operations? like adding the new node to the existing OpenShift cluster?
    Jesse P. Johnson
    @kuwv
    Hello, first time here.
    Jesse P. Johnson
    @kuwv
    Anyone here using Ansible with CRC?
    Daniel Pawlik
    @danpawlik
    Hello. Is possible to set in openshift-ansible (3.11) to redeploy-certificates.yml variable, that will set provided certificate and ignore current self signed cert that is not expired? I have a problem, that my letsencrypt certs expired, then the gates run one more time playbook that was regenerating certs to self signed and now new letsencrypt certs can not be overwritten by redeploy-certificates.yml.
    Mouad Ourgh
    @MouadOr
    Hi Guys, Want to start with OpenShift can you guys share with me materiels or resources if it possible please
    rishinair11
    @rishinair11
    Hey guys quick question, how do I authenticate myself with registry.svc.ci.openshift.org image registry, like will RHID work?
    Stijepo Vrdoljak
    @svrdoljak__twitter
    Hey, does someone know how do i get the deployment config info over the API? I need the "desired" from the command "oc get dc"?