poanetwork/blockscout

Cyber Peach

@peachwaravich

Sorry , I got a problem on verfication contract , How do I fixed it ?

Ethash Solo Pool

@clona_network_twitter

never ))) stupid dev

and low power servers

i say, stupid dev

Sameroom

@sameroom-bot

[Victor Baranov, POA Network] @peachwaravich that error means that byte code which is stored in the blockchain for that contract doesn’t match bytecode which is turned out from the source code and compiler settings you provider at verification page. Likely, compiler settings are wrong (compiler version, evm version, optimization, runs) or provided source code is different from actual one.

northwayac

@northwayac

I'm not sure as to why my transaction has 0 confirmations after waiting about 15 minutes. Does anyone have any insight?? The transaction was to this address: 0x7694948b6ed90bF7F7F84E2C28435DC6a99FF888

Sameroom

@sameroom-bot

<Sameroom> Whoops! You've exceeded your daily message limit on this Sameroom account (it will reset in 24 hours and 0 minutes). If you have too many Tubes for your budget, pause or delete some Tubes on the Manage page. If you dont have a subscription, visit pricing to upgrade to unlimited messaging.

James Young

@jamesyoung

had a question regarding blockscout API : is there a way to query the API to know when a specific main net token synthetic has been minted on the xdai chain?

Sameroom

@sameroom-bot

<Sameroom> Whoops! You've exceeded your daily message limit on this Sameroom account (it will reset in 17 hours and 35 minutes). If you have too many Tubes for your budget, pause or delete some Tubes on the Manage page. If you dont have a subscription, visit pricing to upgrade to unlimited messaging.

Lazar

@Lazar47605591_twitter

Hello, i deposited ETC to coinbase from my exodus wallet, transaction have 7100 confirmations and is still pending on coinbase. anyone know why?

Sameroom

@sameroom-bot

<Sameroom> Whoops! You've exceeded your daily message limit on this Sameroom account (it will reset in 6 hours and 45 minutes). If you have too many Tubes for your budget, pause or delete some Tubes on the Manage page. If you dont have a subscription, visit pricing to upgrade to unlimited messaging.

RSRights4Freedom

@rsrfreedom_twitter

Hi!

About to buy a large position in EWT but cannot figure out a simple way to store them?

as of right now - today - 11/24/20 - can they be stored on a Nano Ledger X with the latest firmware / EWT app?

Sameroom

@sameroom-bot

[Victor Baranov, POA Network] Hi, there is no EWT support here. Please contact EWF support https://t.me/energyweb

aodhgan

@aodhgan

hello! Trying to install local instance of blockscout via docker on CatalinaOS. On step [13/14] getting an error==> Checking PostrgeSQL container ==> Starting PostgreSQL container Error response from daemon: Failed to inspect container postgres: error during connect: Get "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/containers/postgres/json": EOF Error: failed to start containers: postgres make: *** [postgres] Error 1
which also causes the Docker Daemon to fail with 2020-11-24T22:30:54Z dockerd time="2020-11-24T22:30:54.892067393Z" level=info msg="ClientConn switching balancer to \"pick_first\"" module=grpc

have run docker pull postgres successfully. Any other actions I can take?

Flash189

@Flash189

Hello

Help me please with transaction from Myetherwallet

Sameroom

@sameroom-bot

Flash189

@Flash189

I try to send 2,33 ETC to Binance but still 1 day coins don't come in Binance

Sameroom

@sameroom-bot

<Sameroom> Whoops! You've exceeded your daily message limit on this Sameroom account (it will reset in 23 hours and 58 minutes). If you have too many Tubes for your budget, pause or delete some Tubes on the Manage page. If you dont have a subscription, visit pricing to upgrade to unlimited messaging.

Sameroom

@sameroom-bot

[Victor Baranov, POA Network] Hi @aodhgan Do you use Dokerfile / Makefile from master branch of main Blockscout repo?

Levchks

@Levchks

Hi! Is there a way to try blockscout with stakingAuraCoins implementation? Right now it gives me error
(Mix) Could not start application explorer: Explorer.Application.start(:normal, []) returned an error: shutdown: failed to start child: Explorer.Staking.ContractState (EXIT) an exception was raised:
** (MatchError) no match of right hand side value: %{"2d21d217" => {:error, "(-32015) VM execution error."}, "dfc8bf4e" => {:ok, ["0x1000000000000000000000000000000000000001"]}}
(explorer 0.0.1) lib/explorer/staking/contract_state.ex:87: Explorer.Staking.ContractState.init/1
(stdlib 3.12.1) gen_server.erl:374: :gen_server.init_it/2
(stdlib 3.12.1) gen_server.erl:342: :gen_server.init_it/6
(stdlib 3.12.1) proc_lib.erl:249: :proc_lib.init_p_do_apply/3

Sameroom

@sameroom-bot

<Sameroom> Whoops! You've exceeded your daily message limit on this Sameroom account (it will reset in 22 hours and 43 minutes). If you have too many Tubes for your budget, pause or delete some Tubes on the Manage page. If you dont have a subscription, visit pricing to upgrade to unlimited messaging.

imdanishsaber

@imdanishsaber

I'm running a private blockchain and I've been using Metamask connected to my custom RPC URL with no issues.. I'm curious if there's any other Ethereum wallet that let's you add and connect to a custom RPC URL.

Sameroom

@sameroom-bot

[Victor Baranov, POA Network] What is wrong with MetaMask? Nifty Wallet is a fork of MetaMask with built-in support of xDai/POA also supports custom RPC endpoints

imdanishsaber

@imdanishsaber

I wants to have as many possible wallets to use my private network to facilitate user.
Do you know any other wallet except metamask which allow to add custom RPC endpoints?

francess74

@francess74

I have my classic ethereum receipt pending for 4 days you guys solve this problem please can someone help me
0x5e9189a13ea487ee782de2004b20ef7c94771d338efe0c174fef4ac93770a9c4

balajima1989

@balajima1989

wait 1 week

Sameroom

@sameroom-bot

jeff dallas

@g15002481_twitter

I have 3 etc deposits pending at coinbase. One has been pending for days

rubethetruthh

@RubenSalinasJr1_twitter

i had an issue with a transaction from nov. 28th. 0x33f6b338d554359905ea20e99ff9e17391e50ab4dc83f4cc0613bc2067ec7aa5 .. ETC not showing up in my wallet

Makoto Inoue

@makoto

Hi, I am getting Internal server error when I am trying to read smart contract data

To replicate you go to https://blockscout.com/poa/xdai/address/0x1C232F01118CB8B424793ae03F870aa7D0ac7f77/read-contract then type in 100 and [0x1f9840a85d5af5bf1d1762f925bdaddc4201f984,0xe91d153e0b41518a2ce8dd3d7944fa863463a97d] at either getAmountsIn or getAmountsOut

Sameroom

@sameroom-bot

[Victor Baranov, POA Network] Hi, thanks for reporting. Will try to reproduce and fix.

Sameroom

@sameroom-bot

[Victor Baranov, POA Network] @makoto xDai instance is patched in order to cover your issue with method call

aeris-vallee

@aeris-vallee

Hello, how I can transfert from a wallet on another, like the people who rob me do... ?

McGroovyJ

@McGroovyJ

Anyone ever send EWT from Liquid exchange to a cold wallet before?

Robert Edström

@Legogris

Hey, I am configuring a Blockscout deployment and am a bit stuck on how to override default configuration values - it may be that I'm just an Elixir/Mix noob.

I'm doing a containerized deployment. So I can't change files inside the application directory. But I can template in files in other paths or change the command, of course. So there are some things that can't be changed via env vars (e.g. https://github.com/poanetwork/blockscout/blob/master/apps/indexer/lib/indexer/fetcher/coin_balance.ex#L24)

How do I override this value via env var, cmd parameters, or external configuration file?

Sameroom

@sameroom-bot

[Victor Baranov, POA Network] Hi, I am afraid it cannot be overridable unless source code changing. We can provide env vars for fetchers batch size and concurrency in the future

Robert Edström

@Legogris

Thank you for replying! Damn, that's a bummer! if all configuration can be changed either through env vars or configuration file, it's all good to go on containers/kubernetes etc I think.

I was thinking if there's some way through mix command to load separate thingie that overrides the values or something

For now I guess it's still possible to do a new entrypoint with some sed though :see_no_evil:

Where communities thrive

People

Repo info

Activity