Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
  • Jan 30 23:01
    Kdisimone closed #486
  • Jan 30 08:03
    ps2 synchronize #492
  • Jan 30 08:03

    ps2 on omnipod-testing

    More changes for switch to moda… (compare)

  • Jan 30 05:31
    ps2 synchronize #492
  • Jan 30 05:31

    ps2 on omnipod-testing

    CompletionNotifying protocol up… (compare)

  • Jan 30 03:21
    wilson99 starred ps2/rileylink_ios
  • Jan 29 23:02
    ps2 opened #492
  • Jan 29 23:01

    ps2 on rileylinkdevicemanager-thread-safety

    (compare)

  • Jan 29 23:01

    ps2 on alerts-unify

    (compare)

  • Jan 29 23:01

    ps2 on bump-version

    (compare)

  • Jan 29 04:33

    ps2 on omnipod-testing

    Handle settings view controller… (compare)

  • Jan 29 04:03

    ps2 on omnipod-testing

    Handle LoopKit changes to setup… Merge branch 'omnipod-testing' … (compare)

  • Jan 28 19:02

    ps2 on omnipod-testing

    Bump loopkit rev (compare)

  • Jan 28 18:24

    ps2 on omnipod-testing

    Persist message log (compare)

  • Jan 28 02:13

    ps2 on omnipod-testing

    Bump version for release (#490) Merge dev (compare)

  • Jan 26 16:49

    ps2 on v2.1.0

    (compare)

  • Jan 26 16:47

    ps2 on master

    Prevent recursive building (#45… OmniKit wip branch. (#380) * … Back out testing changes and 23 more (compare)

  • Jan 26 16:47
    ps2 closed #491
  • Jan 26 16:46
    ps2 opened #491
  • Jan 26 16:40

    ps2 on dev

    Bump version for release (#490) (compare)

dabear
@dabear
I was also thinking about extending NightscoutUploadKit in rileylink_ios to support nightscout downloads, and then implement a NightScoutCGMManager, so you could fallback to nightscout downloads
katie disimone
@Kdisimone
The selections for dexcom include share credentials. So both sources are available. And you just simply change sources if you want to go from spike to a dexcom. Maybe I’m missing something in what you’re meaning, because those issues seem addressed.
tswire
@tswire
@Kdisimone thanks for your clarification. I just notice the one option missing from the prediction and what exactly was that in your version? Just trying to see if it’s something I should have and want when you do a spike version on 1.9.3
dabear
@dabear
That was only an example. It is also possible to upload cgm values from other sensors to dexcom share, for example. For a long time I uploaded all my cgm data from libre to us dexcom share servers. That was before I created nightscoutshareserver
katie disimone
@Kdisimone
@dabear I’m just confused why you’d want two sources of BG data at the same time. It’s the same time part that I don’t understand.
Pete Schwamb
@ps2
@dabear You can implement a CGMManager that has fallbacks in it if you want. It depends on the CGM source. We don’t implement a general purpose fallback in Loop, because we can do a better integrated setup for Dexcom for those users using a dexcom sensor. All CGMManagers for Loop should generally be representing a local device. I don’t want to support cgms that fail with no internet. Also, most of the time, if you don’t have local access to a local device, remote access to a fallback server won’t help either.
Share-only support is primarily for development; that could theoretically be removed for general builds, and enabled by developers that want it.
tswire
@tswire
Ok. Rileylink worked all day yesterday MUCH better with 1.9.3 and the tightening of the battery plug. However this morning had a 23 min red loop with same errors of unable to connect to rileylink until I turned it off and on.
@jlucasvt did you want to try and swap for some testing?
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Sure what was your order # and I’ll send you an RL and battery to swap.
tswire
@tswire
43501
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Thanks I’ll email you details.
tswire
@tswire
👌
AJ246810
@AJ246810
Hi....I am a new LOOPer, just started things up 2 days ago. The first day went great but this morning my RL wont stay on. Originally it turned on for a few minutes and then died....now it wont turn on at all. Any thoughts?
katie disimone
@Kdisimone
This is same as the request for help in fb? If so, there is active help there now
Resolved
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Thanks @Kdisimone
mariano42
@mariano42
Twice over the past day my RL got super hot and eventually shutdown. I waited for it to cool off and then had to plug it into the charger before i can get it to come back up. I checked the battery connection and everything seems fine, any ideas where else to look?
mlmorey
@mlmorey
I have a couple of dead G5 transmitters and one dead G4 transmitter. If anybody’s interested in them, PM me. @Kdisimone @xpucuto
katie disimone
@Kdisimone
@mlmorey I think @jlucasvt saves up some for sending to @xpucuto in a single package. I’ve got plenty to keep me busy just recently so I’d definitely point you there right now
homebrewbeer
@homebrewbeer
The on /off switch broke on my RL, does anyone know if that can be fixed or is it useless?
katie disimone
@Kdisimone
Did just the little tab break off? A small paperclip can still toggle the switch if the tab broke off @homebrewbeer
homebrewbeer
@homebrewbeer
Thank you, tried but. Just ordered another.
Hristina Dimova
@xpucuto
@mlmorey that’s awesome thank you . Another friend is combining few packages for me , is it ok to send you her address ? She is in New Orleans @Kdisimone thank you too 🌺
mlmorey
@mlmorey
@xpucuto sure, I can send them to either your friend in New Orleans or to @jlucasvt, whatever your preference is.
tswire
@tswire
@jlucasvt did you send me an email yet? No worries if not just checking to see if I missed it
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
Nope. I am traveling in strange parts this week, and my better half is filling orders Ill get your swap board and battery on the list to go out this week.
tswire
@tswire
No problem. Oh just got email!! Thanks!
francesc0-cgm
@francesc0-cgm
Tonight i found riley very hot. Opened the box and battery and board (1.0) seems ok. It is still working (sometimes i had to reboot it due to communication error). Now i am afraid to keep it on my son
Pete Schwamb
@ps2
@francesc0-cgm With the earlier versions of the RL, we had fairly frequent issues with the power regulator that would cause the board to heat up. It never got to any dangerous levels. With the newer 1.0 boards, while I have heard reports, they’ve been pretty rare. I’ve never seen one heat up myself. Also, in these cases, I’ve never heard of any injury or burn. The RL batteries are smaller, and not the large types you find in OpenAPS. I have seen the larger ones end in dangerous situations, but never RL size batteries, even though I’ve put them through tests where I’ve punctured, and hammered on them. I would inspect the battery closely to make sure there is no physical damage to it.
francesc0-cgm
@francesc0-cgm
Board is a 1.0 not yet updated to 2.2. I will check battery...
Tom Boudreau
@tomasboudr
@xpucuto what are you doing with the old transmitters, is there a fresh batch of rechargable ones being made?
Hristina Dimova
@xpucuto
@tomasboudr we just repair them in the standard way and they go a family from the waiting list . We have so many families with refurbished G5 so the two fathers who repair them don’t have time to experiment with the rechargeable ones . And with the G6 in the picture we might try on it actually once we get some dead . So far we have only two dead G6 :)
sethgagnon
@sethgagnon
i may have one hanging around i can donate
g6
let me know how i can get it to u
Hristina Dimova
@xpucuto
@sethgagnon that’s great . Thank you . Will send my friends address in USA in DM
LilDucky
@LilDucky
@xpucuto DM me when you have a few minutes to discuss the rechargeable G5 situation
Hristina Dimova
@xpucuto
@LilDucky I am not the person who repairs them but sending pm
diabeteco
@diabeteco
Cannsomeonenhelp me with my rileylink issue? Since yesterday (monday) i have the blue led permantely on at the bottom of the rileyboard. Can i fix it or is it really broken?
Matt Walker
@walker0
@ishinne have you tried turning it off and on again?
diabeteco
@diabeteco
@walker0 of course i did.
Jeremy M Lucas (GetRileyLink.org)
@jlucasvt
@ishinne please email me GetRileyLink@gmail.com with your original order # and details of your issue. We’ll send a new rl and battery when we get the email. Thanks
diabeteco
@diabeteco
@jlucasvt oh thank you so so so so so much <3 <3 <3 e-mail is on the way
Pete Schwamb
@ps2
@/all To better support searching and organizing discussions around Loop and RileyLink, the Gitter channels for these will be moving to Zulip. In addition to great thread support, Zulip allows attaching images from mobile clients, full markdown support, open registration, search, and free hosting for open source projects. https://loop.zulipchat.com
freddif
@freddif
Hey, I'm about to switch from one Riley Link to another one, anybody have any tips on the best way to do this? Thanks, LindaPerrin
katie disimone
@Kdisimone

Please don’t post here anymore

.

we have moved discussions to a new place, please post in zulipchat now. Link below

.
.
.

https://loop.zulipchat.com/

Pete Schwamb
@ps2
☝️☝️☝️🙄☝️☝️☝️
leo lee
@leoleezoom
ji
Bernhard Klein
@Volberger
9