Where communities thrive

  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
    The same problem, as stated above me
    I tried increasing RAM and CPUs under docker settings and that didn't help
    So it randomly started working without changing any settings. Weird.
    What are the exacts steps to install reaction 2.0 on windows 10 ? For make what we need to install
    Gonçalo Martins Ribeiro
    Reaction 2.0 is does not have support for windows yet
    i installed Ubunut wsl on Win10 and tried building it.
    three of the components gets hosted on docker but reaction_reaction_1 , shows done when i run make start but when i did docker ps command
    i can only see 3 services
    mongodb and reaction_reaction_1 is not shown to be running
    Is there any steps for wsl windows 10 , for building reaction
    Alvaro Bueno
    check the logs of each service using docker-compose logs -f
    check why reaction is hanging
    Russell Wheatley
    Hi everyone :wave: . I'm looking to clone & customise the reaction app and the example-store-front app. Would people recommend I clone their individual repos or should I clone the reaction-platform repo? I have tried cloning the reaction-platform repo but when I pushed to my private repo, it didn't copy the code for the different apps as they're only built in reaction-platform. The code isn't contained within the reaction-platform repo! Any advice would be appreciated.
    I would go for individual, the reaction platform is just a way to quickly run the whole environment faster
    Russell Wheatley
    That's interesting because the documentation seems to indicate that you ought to be developing from reaction-platform. I've implemented it so that I'm using reaction-platform to create the environment, and I'm now pointing 'reaction' & 'example-store-front' directories to my own private repos. Not sure if this is going to create problems though, especially when I rebuild. Presumably, the build will fetch the code from reaction's repositories and write over whatever changes I've made.
    Sujit Sharma
    Hi everyone, I have installed reaction commerce in window 10 at last while i am running reaction with reaction command i get error with message app fail to start .Will you help me to find the solution for the problem
    Sujit Sharma
    Also It throws error Invalid block type at Gunzip.zlibonerror
    Adi Vemuru
    @russellwheatley go to config.mk and change repos links under "define SUBPROJECT_REPOS" to map to your private repos. It should work.
    Jackson Sandland
    After running git clone git@github.com:reactioncommerce/reaction-platform.git && cd reaction-platform/ && make I'm getting the following error:
    if [ ! -d "reaction-hydra" ] ; then git clone "git@github.com:/reactioncommerce/reaction-hydra.git" "reaction-hydra"; cd reaction-hydra && git checkout "v2.8.0"; fi
    Cloning into 'reaction-hydra'...
    remote: Enumerating objects: 8, done.
    remote: Counting objects: 100% (8/8), done.
    remote: Compressing objects: 100% (6/6), done.
    remote: Total 189 (delta 2), reused 6 (delta 2), pack-reused 181
    Receiving objects: 100% (189/189), 50.59 KiB | 1.58 MiB/s, done.
    Resolving deltas: 100% (80/80), done.
    error: pathspec 'v2.8.0' did not match any file(s) known to git
    make: *** [reaction-hydra] Error 1
    v2.8.0 is a release though - what's going on here?
    Jackson Sandland
    I've got it. There's a discrepancy in the tag names. reaction-platform has v2.8.0 listed in the makefile for reaction-hydra but reaction-hydra only has a tag named v.2.8.0
    Khatchig Garabedian
    Good morning all i wanted to start a new project to play around reactioncommmerce but after installing it i try to start the project in visual studio using bash i get the following error Update this project now with 'meteor update --patch'.
    app/client/plugins.less: warn: There are some @import rules those are not taking effect as they are required to be in the beginning of the file.
    app/client/plugins.less: warn: There are some @import rules those are not taking effect as they are required to be in the beginning of the file.
    Nureddin Bedevi

    MacOS: Some of the errors in my console when I do make, any bad effect ?


    info sharp Downloading https://github.com/lovell/sharp-libvips/releases/download/v8.6.1/libvips-8.6.1-linux-x64.tar.gz


    (node:28) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 SIGINT listeners added. Use emitter.setMaxListeners() to increase limit
    Is someone helps me out? installing reaction commerce in windows 7, All installation will be done . at the last some error is appeared to help me ho I will tackle these problems

    stderr: null,

    stdout: null,

    pid: 76,

    output: [ null, null, null ],

    signal: null,

    status: 137 }


    Error: App failed to start

    how to start reaction using npm
    started hydra using docker compose,
    to start reaction in dev mode
    Anyone have an idea why I would be getting the following error in the example store? request to http://reaction.api.reaction.localhost:3000/graphql-beta failed, reason: getaddrinfo ENOTFOUND reaction.api.reaction.localhost reaction.api.reaction.localhost:3000'
    Janus Reith
    @pdreslin Is the api server running on port 3000? Run docker ps and see which conainers are listed here as running
    Mintu Kumar Sah
    Also I am not able to Add Stripe Account.
    Docker ps output:
    Christopher Matuszak
    I'm having trouble doing any installation...
    I'm filling the instructions but I gotta be making a mistake when I get to the cloning portion
    Keeps telling i am unauthorized
    I fixed it...
    Christopher Matuszak
    I apparently forgot to make sure that yarn was installed
    Victor Ekpott

    I keep getting errors trying to install reaction on Windows 10:

    $ make
    Running pre-build hook script for reaction-hydra.
    reaction-hydra post-project-start script invoked.
    postgres uses an image, skipping
    hydra-migrate uses an image, skipping
    hydra uses an image, skipping
    Running post-build hook script for reaction-hydra.
    reaction-hydra post-build script invoked.
    Creating network "reaction-hydra_default" with the default driver
    Creating volume "reaction-hydra_postgres-data" with default driver
    Pulling postgres (postgres:10.3)...
    10.3: Pulling from library/postgres
    Digest: sha256:23c92d48934b254c007c08812638acfd849fe1c179a34b63c752a62100c6524d
    Status: Downloaded newer image for postgres:10.3
    Pulling hydra-migrate (oryd/hydra:v1.0.0-beta.9-alpine)...
    v1.0.0-beta.9-alpine: Pulling from oryd/hydra
    Digest: sha256:39f622aa57e56e2637e69a807e45e6eeca1c56694845daaa0cb43ce2204703da
    Status: Downloaded newer image for oryd/hydra:v1.0.0-beta.9-alpine
    Creating reaction-hydra_postgres_1 ...Creating reaction-hydra_postgres_1 ...Creating reaction-hydra_hydra-migrate_Creating reaction-hydra_hydra-migrate_Creating reaction-hydra_hydra_1 Creating reaction-hydra_hydra_1 Running post-project-start hook script for reaction-hydra.
    reaction-hydra post-project-start script invoked.
    No pre-build hook script for reaction. Skipping.

        Can't find a suitable configuration file in this directory or any
        parent. Are you in the right directory?
        Supported filenames: docker-compose.yml, docker-compose.yaml

    make: * [Makefile:183: build-reaction] Error 1

    Victor Ekpott

    error: invalid path 'imports/test-utils/mocks/meteor/gadicc:blaze-react-component.js'
    fatal: unable to checkout working tree
    warning: Clone succeeded, but checkout failed.
    You can inspect what was checked out with 'git status'
    and retry with 'git restore --source=HEAD :/'

    error: invalid path 'imports/test-utils/mocks/meteor/gadicc:blaze-react-component.js'
    make: * [Makefile:133: reaction] Error 1

    Screenshot from 2020-02-02 19-50-02.png
    Screenshot from 2020-02-02 19-50-02.png
    can you suggest how to resolve this
    Dmitry Motyl
    hi everyone
    could you please explain me how I can start debug one of the modules ?
    I use vs code and I am trying to attach debugger to docker container process
    Alvaro Bueno