Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Repo info
Activity
    Michael Bruhn
    @EviLDgL_gitlab
    the "decryptor" object ist part of the class which contains the automaton, so one "layer" above the actuall scapy ssh implementation
    sezb51
    @sezb51
    Hello. I'm new to scapy and in my learning I'm trying to simulate a vowifi request which includes ipsec (isakmp/esp) toward ePDG then a sip register toward ims. Currently I'm struggling on the first "ike_sa_init initiator request" where I'm not able to add multiple transform proposal to the security association payload. Do you think my objective is doable with scapy ? How is the ipsec implementation so far ? Is this the proper forum for these kind of requests or is there any better repository for more data/code exchange ?
    sezb51
    @sezb51
    The below screenshot is an attempt to derive packet configuration from a working pcap capture.
    Unfortunately scapy seems unable to inspect (or support) all different sublayers and just show the "load" field populated with the data I hoped to re-use as baseline in my python code...
    scapy_isakmp_issue.png
    davehouser1
    @davehouser1
    Hello
    I am trying to configure EDNS for a DNS packet with scapy.
    I need to craft specific sections for EDNS Opt0 based on RFC7871. See section 6
    https://datatracker.ietf.org/doc/html/rfc7871
    I read though this documentation
    https://scapy.readthedocs.io/en/latest/api/scapy.layers.dns.html
    The "Display RFC-like schema" for class scapy.layers.dns.DNSRROPT(args, *kargs) does not seem to resemble this structure. Notice that RFC7871 references RFC6891 in section 6
    Is there a way to adjust scapy to send Option: Padding, and Option: CSUBNET - client subnet sections?
    I can do this with the clientsubnetoption module in python, I have tested. You can see this post for details
    https://stackoverflow.com/questions/28609181/resolve-dns-edns-with-client-subnet-option-in-python
    Plans to incorporate this into Scapy? or am I missing something
    bishop527
    @bishop527
    I'm starting to learn about the HDLC protocol and have a question about how it's implemented in Scapy. I see the address and control fields are defined, but not the Flag or FCS/CRC fields. How are those fields accounted for/handled in Scapy? Thanks.
    Guillaume Valadon
    @guedou
    @davehouser1 we have the basic EDNS0TLV RR, but you will need to do the encoding/decoding yourself. Feel free to submit a PR.
    iznogoud-zz
    @iznogoud-zz
    Hello,
    I am doing some experiments with IPsec and would like to decrypt the IKE_AUTH and INFORMATIONAL IKEv2 messages. I have access to the all the keys necessary, SK_e(i,r) and SK_a(i,r) and SPIs but am not sure this is even possible with scapy. Does anyone know if I can do this with scapy? Is there an alternative, if not?
    Thanks
    XyKong
    @TraverseBiTree
    scapy sniffing less packets than wireshark
    image.png
    XyKong
    @TraverseBiTree
    image.png
    I use a sleep() function to simulate the time spent processing tasks in callback function.
    both scapy and wireshark start at the same time
    Obviously see scapy cautions less packet than wireshark . How can I catch all packets using scapy without any packet loss
    Guillaume Valadon
    @guedou
    Scapy cannot match wireshark performance. To perform a fair comparison, you should replace the sleep call, by printing the packet summary.
    erfanask
    @erfanask
    hi !
    i try to snif HTTP request behind nginx
    for example my app working on port 3000 behind nginx on 443 and 80 .
    i try to bind 3000 to HTTP , thats working when i try to accesss 3000 but when i try to use port 80 or 443
    I can't see requests between nginx and my app on port 3000 .
    davidozc
    @davidozc
    Hi,
    Im trying to bind layers like following,
    bind_layers(LayerB, LayerC, fields from LayerA)
    is this possible to do so? or any other workaround to bind two layers?
    alixpat
    @alixpat:matrix.org
    [m]

    Hi,

    I'd like to redirect a tcpdump sniff to scapy.scapy.sendrecv.sniff.
    Did you have an idea ?

    AmericanWhey
    @AmericanWhey

    I apologize, I have no network analysis experience, but I have a question that I hope isn't too taxing for someone who has knowledge of what scapy or other packet forging programs are capable of. A "fact-check" website is claiming that scapy or other tool could be used to forge the entire network traffic of hundreds of Internet connected voting machines in the 2020 Presidential Election. The author isn't talking about capturing the traffic, supposedly, the capturing of the election traffic as already been done. He is claiming that scapy or other tool could be used to forge an 'alternative' version of the 2020 election traffic. To me, that would seem utterly impossible, because even if scapy or other tool were theoretically capable, the labor required to achieve such a feat without producing absolutely absurd, flawed results would be insurmountable. I wouldn't argue that a small sample of, say, 20 votes could be forged believably, but millions of votes or potentially tens of millions? No way, with the limited knowledge I have about network traffic.

    So, am I right that it is absurd to say that scapy or other program could believably be used to forge that scale and size of network traffic?

    Guillaume Valadon
    @guedou
    Given the sensitive topic, it is difficult to provide a satisfying answer without any context regarding the network protocols in use. Could you share the link to the claim?
    AmericanWhey
    @AmericanWhey

    Yes, thank-you.
    First, here's the most recent interview with the security specialist talking about the sample capture: t.ly/hEBd
    Here is an earlier interview with, I think, the same security specialist: t.ly/gdI6
    Here, t.ly/slPc beginning at timecode 01:36:05 through 01:49:45, is an interview with a different security specialist that goes into more detail. This is the first and oldest video created on the subject. Still, keep in mind, these videos were created for the general public, not network professionals, so its technical content is limited.

    Finally, here t.ly/OqXo is the article from the fact-check site that is asserting that scapy or other tool could be used to 'forge' the network capture of the 20 votes that were changed. Fine. I don't argue that's not potentially possible on a limited number like that. But, to claim that millions of votes could be forged in a highly credible way by scapy or a different tool ... I find that very hard to believe.

    Tao Wang
    @wtao0221
    Hi,
    if a field (A) is a BitField of size 3 with a following field (B) of size 5. can we directly set intended values to them (A or B)? Will scapy check whether the value is beyond its range?
    r4t31
    @r4t31

    Hello!

    How can I create a new package from raw hex string (0x16030100...)

    from scapy.all import *
    load_layer("tls")
    
    pkg = TLS("0x160301003502000031030160BE....")
    pkg.show()

    this not working.

    Pierre Lalet
    @p-l-
    Try:
    from scapy.all import *
    load_layer("tls")
    
    pkg = TLS(hex_bytes("160301003502000031030160BE...."))
    pkg.show()
    It should work. Here is what I get with the incomplete data you posted:
    >>> TLS(hex_bytes("160301003502000031030160BE")).show()
    ###[ TLS ]### 
      type      = handshake
      version   = TLS 1.0
      len       = 53    [deciphered_len= 8]
      iv        = b''
      \msg       \
       |###[ Raw ]### 
       |  load      = '\x02\x00\x001\x03\x01`\\xbe'
      mac       = b''
      pad       = b''
      padlen    = None
    Tao Wang
    @wtao0221
    Hi, is there any way to bind layers where the potential values are from a list? like bind_layers( TCP, HTTP, sport in some_list )? or should I write each value in a bind_layers() statement?
    gpotter2
    @gpotter2
    You can obviously loop on it
    for i in [1, 2, 3]:
        bind_layers(TCP, HTTP, i)
    mercurial-tim
    @mercurial-tim

    Hi folks, I've sniffed a DHCP Discover pkt via Scapy, and seems like the 'chaddr' field is not being read properly. Wireshark shows it just fine ('10:39:e9:7f:d5:81')!

    flags      : FlagsField                          = <Flag 32768 (B)> ('<Flag 0 ()>')
    ciaddr     : IPField                             = '0.0.0.0'       ("'0.0.0.0'")
    yiaddr     : IPField                             = '0.0.0.0'       ("'0.0.0.0'")
    siaddr     : IPField                             = '0.0.0.0'       ("'0.0.0.0'")
    giaddr     : IPField                             = '0.0.0.0'       ("'0.0.0.0'")
    chaddr     : Field                               = b'\x109\xe9\x7f\xd5\x81\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' ("b''")

    Any thoughts why this is not showing the actual mac address here?

    gpotter2
    @gpotter2
    Are you doing ls(..) instead of pkt.show() ?
    kaitogon
    @kaitogon
    Hi I have a question please ? For each datagram exchange, TCP initiates a new session between the FTP client and the FTP server. The question is that can I change the tcp session size from scapy ?
    for ftp ?
    mercurial-tim
    @mercurial-tim
    @gpotter2 - yes doing ls(pkt). Tried pkt.show() too, same outcome:
    ###[ BOOTP ]###
               op        = BOOTREQUEST
               htype     = 1
               hlen      = 6
               hops      = 0
               xid       = 3074830325
               secs      = 0
               flags     = B
               ciaddr    = 0.0.0.0
               yiaddr    = 0.0.0.0
               siaddr    = 0.0.0.0
               giaddr    = 0.0.0.0
               chaddr    = b'4\xef\xb6\x7f\xd5\x81\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
    stereoid00
    @stereoid00
    Hi all, Can i join different packet sets into one so that I can send them with a single 'sendpfast()' method? Those packet sets use different protocols (TCP, UDP and ICMP). Of course ther option would be to use python threading and use three 'sendpfast()' commands but i'm not sure how would performance work
    Afilsi
    @Afilsi
    Hi @stereoid00 I'm think it's not the best way to do it, but I would try to join them all in one big list like this: allPackets = [pack for pack in TCPSet] + [pack for pack in UDPSet] + [pack for pack in ICMPSet]
    Afilsi
    @Afilsi
    For my part, I also have a question, I have declared other tables than the usual in /etc/iproute2/rt_tables and add routes to these tables. If I do an ip route show table all, my routes are present, but conf.route does not see them.
    Is it possible to tell scapy to go read this other routes ?
    Guillaume Valadon
    @guedou
    Unfortunately no. Scapy only gets the entries in the main table. I am not aware of a simple way to access them.
    Afilsi
    @Afilsi
    Okay, thank you very much for your answer.
    PhilippTakacs
    @PhilippTakacs
    Hi following code gives None p = DNS(qd=[DNSQR()],an=[DNSRR()]) DNS(DNS(p.build()).an[0].rdlen
    is this considered as a bug?
    PhilippTakacs
    @PhilippTakacs
    • secound part: ```
      DNS(p.build()).an[0].rdlen
    Guillaume Valadon
    @guedou
    Yea this is a bug. Can you fill an issue?
    PhilippTakacs
    @PhilippTakacs
    Yes it's
    Milad
    @miladstar77
    Hello everybody, how can I read big pcap file line by line instead of one time in rdpcap … to increase reading speed
    fouzhe
    @fouzhe
    Hi, all!
    In the Fuzz function, those fields without pre-assigned values will be randomly generated, as is referred in the usage.
    However, in general, fuzzing a packet p means randomly modify some fields of p.
    So, as for a well-formed packet p, how to generate a malformed packet p' based on p using Fuzz function, or in other ways?
    Thanks!
    Afilsi
    @Afilsi
    Hello @miladstar77 , PcapReader() creates an "iterator" on your pcap file and load a packet only when it's needed. So you can simply use an for loop to read your file line by line.