Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Activity
Ronald Munjoma
@ronna
Hi @DXCYZ dfor 21 CFR part 11 a look at this community post by @xispa : https://community.senaite.org/t/21-cfr-part-11-compliance-gap-analysis/321
Ronald Munjoma
@ronna
@MohamedEisa01 my bad, Senaite (core) 2.0 was released 9 days ago
Oscar Delgado
@oscaralexanderd_gitlab

Hi, I have checked and the results report does not comply with 7.8 of iso 17025. I need a developer to make the results report meet the requirements of iso 17025.

Who can help me?

MohamedEisa01
@MohamedEisa01
Thank you @ronna I already install it with correct version " plone v4.3.19 and senaite.lims v1.3.3".
Now I need to edit the site logo can you help, please. Thank you in advance
yomarbuzz
@yomarbuzz
Can anyone give me directions to a working installation guide? the one on the webpage doesn't work. I can't build the docker images either with the instructions given on github.
DXCYZ
@DXCYZ
@oscaralexanderd_gitlab Hi, do you have a checklist or gap analysis with ISO 17025 & senaite?
Ronald Munjoma
@ronna
Hi @MohamedEisa01

Thank you @ronna I already install it with correct version " plone v4.3.19 and senaite.lims v1.3.3".
Now I need to edit the site logo can you help, please. Thank you in advance

you can follow instructions here: https://www.bikalims.org/manual/introduction-and-overview/client-facing-lab-portal/replace-you-lims-banner

Hi @yomarbuzz

Can anyone give me directions to a working installation guide? the one on the webpage doesn't work. I can't build the docker images either with the instructions given on github.

What do you mean its not working? What error messages are you getting?

which version are you installing? 1.3.x or 2.0?
Ronald Munjoma
@ronna
Hi @xispa @Espurna @ramonski what is the difference between senaite.health and senaite.patient? thanks
Ramon Bartl
@ramonski
Hi @ronna, senaite.patient integrates only patient tracking for SENAITE 2.x which are loosely coupled over the Medical Record Number (MRN) to an external Patient Record Management System. On the other hand, senaite.health is for SENAITE 1.x only and provides complete suite of health/hospital related records and overlaps a lot with what Patient Record Management Systems provide.
yomarbuzz
@yomarbuzz
@ronna Error: The requirement ('Plone>=4.3.20') is not allowed by your [versions] constraint (4.3.19)
Is the error I get when following the guide on the webpage to the letter.
I'm trying to use Senaite as middleware to push lab instrument data into HIS, as far as I understand some eggs that I might need (senaite.instruments; senaite.astm; senaite.lis2a) are limited to 1.3.x, is this the case or should I install 2.0.0?
Jeff Bullard
@Jeff-DFWEnv
There was boostrap.py in senaite.lims 1.3.
senaite.lims 2.0 does not have this bootstrap.py
For 2.0 can we copy and use the same one from 1.3
Jeff Bullard
@Jeff-DFWEnv
Figured out the bootstrap.py. I wish that could be added to 2.0 senaite.lims Updated Install Guide for testing and development here: https://community.senaite.org/t/complete-setup-guide-step-by-step/137/22
Ronald Munjoma
@ronna

@ronna Error: The requirement ('Plone>=4.3.20') is not allowed by your [versions] constraint (4.3.19)
Is the error I get when following the guide on the webpage to the letter.
I'm trying to use Senaite as middleware to push lab instrument data into HIS, as far as I understand some eggs that I might need (senaite.instruments; senaite.astm; senaite.lis2a) are limited to 1.3.x, is this the case or should I install 2.0.0?

@yomarbuzz Senaite 1.x runs on Plone 4.3.19 and below. Please Plone 4.3.19

Ronald Munjoma
@ronna

Hello guys, I'm trying to install senaite.lims but it always gets this error, can you please help

Got senaite.core 2.0.0.
Version and requirements information containing plone:
[versions] constraint on plone: 4.3.19

Hi @MohamedEisa01
Senaite 2.x requires Plone 5 and you have Plone 4.3.19 installed please install Plone 5
Lunga
@Lunga001

Humble greetings everyone,

Is there perhaps a way to change the css id - #senaite-toolbar on the ZMI, so that I could change the background-color of the senaite-toolbar css id per site?
The senaite-toolbar id is on the template senaite.core/src/senaite.core/browser/viewlets/templates/toolbar.pt and styled on senaite.core/webpack/app/scss/toolbar.scss

I have tried to locate ploneCustom.css but that seems to point to the Barceloneta Theme which is not active on Senaite Lims
Is there perhaps another way to add custom css on the ZMI on Senaite Lims 2.x?

zhanglin
@artofegg_twitter
Hello everyone,Who can recommend some Plone5 LDAP plug-ins and give howto, thanks a lot.
To install plug-in with bulidout at "zeo" or "instance1",I run senaite by docker way.
Ramon Bartl
@ramonski
@artofegg_twitter: Try https://pypi.org/project/pas.plugins.ldap when you are using Senaite 2.x on Plone 5
zhanglin
@artofegg_twitter
thank u,let me read it
zhanglin
@artofegg_twitter
@ramonski i use docker for SENAITE production setups,like this: '$ docker run -d --name=zeo senaite zeo' && '$ docker run -d --name=instance1 --link=zeo -e ZEO_ADDRESS=zeo:8080 -p 8081:8080 senaite'
So,which container should I install the pas.plugins.ldap with buildout
zhanglin
@artofegg_twitter
and Dependencies seems python-ldap python-dev libldap2-dev libsasl2-dev libssl-dev
zhanglin
@artofegg_twitter
pas.plugins.ldap working well
vishnu vardhana
@vishnuvardhana
Hi all ..
vishnu vardhana
@vishnuvardhana
is there a way we can customize senaite html ?
like logo
some banner stuff
amediphoko
@amediphoko
Hi everyone, I am trying to create an AR using the json api but I keep getting a response to provide a SampleType even though the payload I am posting has all the required data. This is the traceback I am getting from the senaite production instance:
2021-10-04T15:51:18 WARNING senaite.core get_tool::getToolByName(<object object at 0x7fe206fc2980>, 'portal_types') failed: APIError('<object object at 0x7fe206fc2980> is not supported.',) -> falling back to plone.api.portal.get_tool('portal_types').
vishnu vardhana
@vishnuvardhana
how do we solve CORS issue while we try to authenticate via a react app ? any help is appreciated
chris
@chris08416019_twitter
I installed senaite in ubuntu 18.04, an error occurred

HI
I follow the Senaite 1.x installation manual, but when I execute PYTHONHTTPSVERIFY=0 buildout, the following error appears. How should this be solved?

Thank.

============================================
While:
Installing instance.

An internal error occurred due to a bug in either zc.buildout or in a
recipe being used:
Traceback (most recent call last):
File “/home/senaite/miniconda2/lib/python2.7/site-packages/zc/buildout/buildout.py”, line 2174, in main
getattr(buildout, command)(args)
File “/home/senaite/miniconda2/lib/python2.7/site-packages/zc/buildout/buildout.py”, line 817, in install
installed_files = self[part]._call(recipe.install)
File “/home/senaite/miniconda2/lib/python2.7/site-packages/zc/buildout/buildout.py”, line 1603, in _call
return f()
File “/home/senaite/buildout-cache/eggs/plone.recipe.zope2instance-4.2.11-py2.7.egg/plone/recipe/zope2instance/init.py”, line 91, in install
major, minor = parsed[0:2]
TypeError: ‘Version’ object has no attribute ‘getitem’
eatmycookie
@eatmycookie
Hello, does anyone have buildout.cfg and requirements.txt for senaite 2.0.0. + plone 2.5, ubuntu 20.04 ?
Ronald Munjoma
@ronna
Hi @eatmycookie
Jeff Bullard
@Jeff-DFWEnv
Is there a way to select multiple rows within a worksheet for example? I can select all or select one-by-one. I want to check the box for about 250 rows out of 900 total. Tedious to select 250 boxes one-by-one.
Ramon Bartl
@ramonski
@Jeff-DFWEnv: Unfortunately, this is currently not possible. I also thought recently that this would be a good feature for senaite.app.listing. Currently, you have to choose the classic layout, select all and deselect the ones you don't want.
khanhudanurul
@khanhudanurul
Hi everyone, we have been using Senaite Health 1.2.4 for generating SARS-CoV-2 RT PCR reports which mandates attaching a QR code which should link to the pdf file of the report. We achieve this by attaching the QR code image in interpretation section via "Insert image from URL" under external insert image option. Now when we try to publish the reports in bulk or even sometimes single report, Senaite becomes almost unresponsive and very slow. I have tried packing the data to 3 days, but of no help. I guess increasing the number of instances might help. How should I do that. I am very afraid of touching the buildout file as most of the times I have touched it, my Senaite instance gives some traceback error.