sympy/sympy

A computer algebra system written in pure Python http://sympy.org/ . To get started to with contributing https://github.com/sympy/sympy/wiki/Introduction-to-contributing

Akshat Sood

@akshatsood2249

Hello everyone, Can someone please guide me on how to test changes one makes to the codebase. Like if I change a particular code locally then how can I check whether my changes are admissible or not.

Harshit Yadav

@hyadav2k

Hello everyone, Can someone please guide me on how to test changes one makes to the codebase. Like if I change a particular code locally then how can I check whether my changes are admissible or not.

You should go through https://github.com/sympy/sympy/wiki/Development-workflow, it will resolve your doubts.

Akshat Sood

@akshatsood2249

Thank You @hyadav2k :)

Sähr gudor mänsch

@IstUnlustig_twitter

is it possible with sympy to get the formula of sin(x) instead of the resulting value, I did not found that in the documentation

is this done by a solver?

nonlinsolve

sorry for asking, I found it

Akshit Parmar

@parmar-hacky

hello everyone can anyone show me the direction for GSoc 2021 for sympy organisation i am very much interested in contributing

Karl H

@KarlJoad

I am trying to figure out a problem in octsympy. In sympy 1.5.1, sympy.compatibility.integer_types gives a tuple of the types of integers supported (<type> int and long). I can't find an equivalent option in sympy 1.6.2. Where is it located? I've checked sympy.core.compatibility, but there doesn't seem to be one there that has both the types int and long, just the int class.

Aaron Meurer

@asmeurer

This was removed because it's no longer needed, as SymPy no longer supports Python 2.

Karl H

@KarlJoad

Ok... So, can cases of sympy.compatibility.integer_types be replaced with Python 3's built-in int clas?

Aaron Meurer

@asmeurer

Yes

Also FWIW sympy.core.compatibility is only designed for internal use in SymPy, so using it in an external library is not recommended. We don't make any backwards compatibility guarantees for that module.

Karl H

@KarlJoad

Ok, I'll do that then, and hopefully it works.

Ok. I'm not the core maintainer, so I don't have any control over that.

Oh, I assume the same holds true for sympy.compatibility.string_types and python 3's str class, correct?

Aaron Meurer

@asmeurer

Yes

Thomas Aarholt

@thomasaarholt

Hiya, I'm about to submit a PR for cupy support on top of #20271

Just a quick question: The numeric computation docs mention Theano support, but I was unable to get that to work. Does it currently work?

Thomas Aarholt

@thomasaarholt

Scratch that, a quick search among the GH repo issues shows that it should work fine. I wonder where I went wrong!

AbhishekS78

@AbhishekS78

hello everyone,
can anyone tell me if sympy is participating in GSoC 2021 or not?
if yes then, can anyone show me the direction for GSoC 2021 for sympy organization, I am very much interested in contributing

petschge

@petschge

Any ideas why I run into the issue reported at sympy/sympy#20629 ?

kunalsingh2002

@kunalsingh2002

Hello Mentors , I'm KUNAL SINGH 2nd year computer science undergraduate from IIT Kharagpur, India , I'm very much interested in contributing to sympy but I'm unable to find a starting point , can anyone help me with this ?

Suryam Arnav Kalra

@suryam35

Hi developers !
I am Suryam Arnav Kalra , second year undergraduate student in Computer Science and Engineering department at IIT Kharagpur , India.
I am a beginner in open source and i am interested in contributing to Sympy. It would be really great if you could help me get a starting point to begin my journey.

Harshit Yadav

@hyadav2k

Hi @kunalsingh2002 @suryam35, you guys can start with https://github.com/sympy/sympy/wiki/Introduction-to-contributing for starters, and then you can refer to the docs https://docs.sympy.org/latest/index.html. For the later part, refer to https://github.com/sympy/sympy/wiki/Development-workflow.

Thomas Aarholt

@thomasaarholt

Hiya. Given func = sp.lambdify(args, expr), is it possible to print the "string" that lambdify compiles, ie. the expression that is eventually called by numpy (or mpmath)?

Aaron Meurer

@asmeurer

@thomasaarholt yes, you can look at inspect.getsource(func), or just func?? in ipython

1 reply

Craig Russell

@ctr26

"Does anyone know how to give sympy known identies to help it with tricky integrals? I'm doing an integral across all space for a bessel function and I have a neat identity which I think would help sympy to solve it."

The manual integrate module was suggested but the identity I have is for a definite integral

And I don't think manual integrate works with definite integral rules?

Eva Tiwari

@evatiwari

I have a doubt which is not exactly SymPy related, but it might help me out with an issue. What is the difference between tensor product of two matrices and two bras/kets? Why is it that the dagger of one does not change the order, while that of the other does?

Eva Tiwari

@evatiwari

@ctr26 could you open an issue for the same? There is a function called heurisch(), which deals with Bessel functions, but it is only for indefinite integrals and is based off of a slow algorithm. I did not find any option which is as good as manual integrate (which, you are right, does not work with rules for definite integrals).

Craig Russell

@ctr26

Have done thanks

What does it mean when heurisch never returns an output?

Eva Tiwari

@evatiwari

@ctr26 it hangs, on interrupting the process it shows the traceback.

Craig Russell

@ctr26

Lambda_0*((-r + x/M)*exp((-(-r + x/M)**2 - y**2/M**2)/(2*\sigma_g**2)) - (r + x/M)*exp((-(r + x/M)**2 - y**2/M**2)/(2*\sigma_g**2)))**2/(2*pi*M**2*\sigma_g**6*(exp((-(-r*sin(2*pi/m) + y/M)**2 - (-r*cos(2*pi/m) + x/M)**2)/(2*\sigma_g**2)) + exp((-(-r*sin(4*pi/m) + y/M)**2 - (-r*cos(4*pi/m) + x/M)**2)/(2*\sigma_g**2))))

and

16*Lambda_0*(-M*x_0_tau + x)**2*(M*lambda*besselj(1, 2*pi*n_a*sqrt(M**2*x_0_tau**2 + M**2*y_0_tau**2 - 2*M*x*x_0_tau - 2*M*y*y_0_tau + x**2 + y**2)/(M*lambda)) - pi*n_a*sqrt(M**2*x_0_tau**2 + M**2*y_0_tau**2 - 2*M*x*x_0_tau - 2*M*y*y_0_tau + x**2 + y**2)*besselj(0, 2*pi*n_a*sqrt(M**2*x_0_tau**2 + M**2*y_0_tau**2 - 2*M*x*x_0_tau - 2*M*y*y_0_tau + x**2 + y**2)/(M*lambda)))**2/(pi*lambda**2*(M**2*x_0_tau**2 + M**2*y_0_tau**2 - 2*M*x*x_0_tau - 2*M*y*y_0_tau + x**2 + y**2)**3)

Trying to integrate either of these across infinity in x

sympy.Integral(integrand,(x,-sympy.oo,sympy.oo)).doit()

StackTraces respective:
https://pastebin.com/FTafTjF9
https://pastebin.com/u9NTQPib

Neither converges " @evatiwari

Craig Russell

@ctr26

These stack traces after running it for a bit longer
https://pastebin.com/SCHykTyR https://pastebin.com/WRgXuTHu

Eva Tiwari

@evatiwari

I'll try looking into this. If I find something I'll let you know.

Shreyas M S

@Shreyas-MS

Hi, I'm trying to write a parser that converts expressions from my custom expression language to sympy friendly expressions. Does anyone have any resources that would help me? my end goal is to convert expressions written in my language and translate it to something I can evaluate in sympy/numpy.

Nicolai Prebensen

@nicolaipre_twitter

Hi. I am having some trouble implementing inverse_phi (euler's totient) with prime factorization for very large numbers. Does sympy have any inverse_totient functionality, or could someone possibly point me in the right direction for implementing this using SymPy?

Given (p-1)(q-1) I want to find n, for phi(n) = (p-1)(q-1). I.e: phi(n) = 24 --> n = pq = 35 , except I need it to handle numbers as large as 4529255040439033800342855653030016000000000++

Harshit Yadav

@hyadav2k

Hi, Is there some way to access the function which is to be differentiated i.e. the argument of the Derivative, for e.g. In y=Derivative(x2+2,x), how can I access x2+2.

Kalevi Suominen

@jksuom

In [13]: y.args[0]
Out[13]: 
 2    
x  + 2

Harshit Yadav

@hyadav2k

Thanks a lot!! :)

Vishesh Mangla

@Teut2711

I want to solve a bvp numerically with steps. This is my relation. 1<i, j<5 . the number of equations are huge. How can I make them and then solve with the help of sympy?

shardul semwal

@Shardul555

Hello all, I was adding a test case for an issue where I encountered assertion error, I do not have much idea about it. Can someone guide me how it can be resolved?

Traceback (most recent call last):
File "/home/shardul/sympy/sympy/series/tests/test_series.py", line 208, in test_issue_9173
assert Q.series(y, n=3) == b_2y**2 + b_1y + b_0 + O(y**3)
AssertionError

Vishesh Mangla

@Teut2711

why don't you use the debugger @Shardul555 ?

shardul semwal

@Shardul555

@XtremeGood okay I was unaware of it , thank you.

JSS95

@JSS95

Hi, is there any way to convert expression containing power, like expr = (x^2 * y^3), to unevaluated Mul like Mul(x, x, y, y, y, evaluate=False)?

Sayandip Halder

@sayandip18

Can anyone tell me if it is possible to pull changes from an old PR? Two of my PRs were from a system which has broken down and now I'm unable to work on them.

11 replies

Where communities thrive

People

Repo info

Activity