Where communities thrive


  • Join over 1.5M+ people
  • Join over 100K+ communities
  • Free without limits
  • Create your own community
People
Activity
    Bițu
    @o_bitu_twitter
    rpc error with daemon instance 0 when submitting block with submitblock {"code":-22,"message":"Block decode failed"}
    joaquinek
    @joaquinek
    npm ERR! path /home/package.json
    joaquinek
    @joaquinek

    knock down the other errors now I have this npm ERR! path /home/package.json
    npm ERR! code ENOENT
    npm ERR! errno -2
    npm ERR! syscall open
    npm ERR! enoent ENOENT: no such file or directory, open '/home/package.json'
    npm ERR! enoent This is related to npm not being able to find a file.
    npm ERR! enoent

    npm ERR! A complete log of this run can be found in:
    npm ERR! /home/admin/.npm/_logs/2018-07-26T19_14_45_411Z-debug.log

    i know it is looking for a file and cannot find it. Working on it... Thanks for your help Joaquinek
    :)
    joaquinek
    @joaquinek
    You need to wait until it finish sync-ing you can check status by doing this zcash-cli getinfo
    once it has been sync than you should be okay to run npm start. I will write a guide since nobody wants to do it.
    "version": 1010250,
    "protocolversion": 170006,
    "walletversion": 60000,
    "balance": 0.00000000,
    "blocks": 49872,
    "timeoffset": 0,
    "connections": 8,
    "proxy": "",
    "difficulty": 34.01974967055578,
    "testnet": true,
    "keypoololdest": 1532632313,
    "keypoolsize": 101,
    "paytxfee": 0.00000000,
    "relayfee": 0.00000100,
    "errors": ""
    joaquinek
    @joaquinek
    I am on testnet and will eventually switch. Thanks again for all your help you guys are the best!
    Bițu
    @o_bitu_twitter
    "code":-22,"message":"Block decode failed"
    joaquinek
    @joaquinek
    I cant seem to pass this error after typing npm start
    npm ERR! missing script: start
    any help?
    Bițu
    @o_bitu_twitter
    Can anyone please help me with this fucking error? I start to pull my hair out x( "code":-22,"message":"Block decode failed"
    SongZhizhai
    @SongZhizhai
    Where can I find the log file of z-nomp.I can not find it.
    In which path?
    Xandrah
    @Xandrah
    Hello can anyone tell me where the z-nomp logs are located?
    faheemadam
    @faheemadam
    hi

    i am trying to setup z-nomp but i get the invalid checksum error if i remove the rewardrecepient

    "rewardRecipients": {
        "": 0.2,
        "": 0.3
    },

    from the zcash.config it starts up

    any advise on how to fix this ?
    hellcatz
    @hellcatz
    "rewardRecipients": {
    },
    @Xandrah the logs are output to screen, so you must be running it in something like systemd or pm2 to obtain log files.
    faheemadam
    @faheemadam
    @hellcatz thanks , but how do i set the reward for the pool then ?
    hellcatz
    @hellcatz
    "rewardRecipients": {
        "yourCoinAddress": 0.2
    }

    FYI, z-classic/z-nomp kinda outdated...

    https://github.com/z-nomp/z-nomp
    https://discord.gg/4mVaTsH
    ^ May be something to look at...

    faheemadam
    @faheemadam
    appreciate the assistance, thanks again
    Bițu
    @o_bitu_twitter
    Can someone please help me with error : block decode failed? I am using z-nomp, tested with litecoinz and buck coin. Same problem everywhere.
    Thierry de Lapasse
    @tdelapasse_twitter
    Hi guys, I'm a newbie
    I installed a new mining pool (poolstars.eu) and I have 1 question: how do I know my pool mined a block?
    How can I be sure all is set correctly?
    I ran it for more than one day now and Total Blocks, Pending & Confirmed are still 0. :(
    Thank you for your assistance.
    SongZhizhai
    @SongZhizhai
    How to use pps mode?
    Thierry de Lapasse
    @tdelapasse_twitter
    "pps mode" ?
    Thierry de Lapasse
    @tdelapasse_twitter
    Understood: PPS or PPNLS, right?
    I don't know in fact. :( I let the default parameters.
    Where is this set? config.json?
    Urbanrace6
    @PaulSco44480212_twitter
    Hey, I'm kinda new to z-nomp. I recently setup a pool with a few equihash coins. I have about 40Ksol's mining, yet over the past few days not one block found. not even BTCP with the highest success chance. Anyone have any idea?
    Thierry de Lapasse
    @tdelapasse_twitter
    Quite the same question as mine... ;)
    Gautam Dhameja
    @gautamdhameja
    @crytoguy1_twitter I'm also facing the same "Expected String" issue but in another library. Can you please share if you were able to find the root cause and the fix?
    Thierry de Lapasse
    @tdelapasse_twitter
    It seems that @crytoguy1_twitter misconfigured the parameter "rewardRecipients" in a coin file (see directory "pool_configs" ; litecoin.json for example).
        "rewardRecipients": {
            "n37vuNFkXfk15uFnGoVyHZ6PYQxppD3QqK": 1.5,
            "22851477d63a085dbc2398c8430af1c09e7343f6": 0.1
        },
    Maybe you forgot a double-quote...
    pentasquadcom
    @pentasquadcom
    Hi, I had read on the github about your article "If your pool uses Z-NOMP let us know and we will list your website here." . At this moment we are still making the theme , the site is in pre-alpha but the Pool is working 100% .
    zheng9980419
    @zheng9980419
    Who can provide a zcash latest wallet for the mine pool source code?
    zheng9980419
    @zheng9980419
    @pentasquadcom Is it convenient to provide the source code for the mine pool that can be run normally after zcash 2.0?
    pentasquadcom
    @pentasquadcom
    Ok the Pool is now on and functional . http://maupool.com main website , http://console.maupool.com it is the pool. Best regards, MauPool Team
    Kainzo
    @Kainzo
    Greetings
    First time user here :)
    Kainzo
    @Kainzo
    Is there another guide for the z-nomp install? https://zdeveloper.org/wiki:z-nomp_install
    This one seems to be down
    sonicdx10
    @sonicdx10
    @joaquinek you need to wait the node to sync